To press your design using DTF transfers, follow these general pressing instructions:

Ensure your garment or surface is clean, dry, and free from any wrinkles or debris. Pre-press garments to release moisture.

Set the Heat Press: to 300 degrees Fahrenheit.

Press for 10 seconds with high pressure (60 PSI). Pressure is one of the most important factors in successfully adhering your transfers to your garment.

Let the garment completely cool down. Once cooled down, carefully peel off the transfer film starting at a corner.

Repress another 10 seconds to seal in your design with a Teflon sheet on top as protection.

The second press seals in your design.