GET REWARDS WITH DTF TRANSFERS NOW

Same-Day Shipping Available – Enjoy Free Shipping on Transfer Orders Over $99

English

Client Service

DTF Pressing Instructions

DTF Pressing Instructions – Your Step-by-Step Guide to Flawless Transfers

Wondering how to apply DTF transfers the right way? You’re in the perfect place. This complete DTF transfer application guide will walk you through each step to help you achieve vibrant, sharp, and long-lasting prints that hold up wash after wash.

Our easy-to-follow DTF pressing instructions are built for consistency—whether you're customizing T-shirts, hoodies, tote bags, or performance gear. With the right heat, pressure, and technique, you’ll turn your designs into professional-quality results your customers will love.

DTF Heat Press Settings – Quick Reference

Transfer Type	Temp	Time	Pressure	Peel Type
CoolPeel DTF Transfer	300°F (149°C)	10–12 sec	Medium–Heavy	Cold Peel
Hot Peel DTF Transfer	300°F (149°C)	10–12 sec	Medium–Heavy	Hot Peel
Glitter DTF Transfer	310°F (154°C)	10–15 sec	Medium–Heavy	Cold Peel

Step-by-Step DTF Pressing Instructions

1. Pre-Press Your Garment

Start by placing your blank shirt (or hoodie, or tote—whatever you’re pressing) onto the heat press. Give it a quick 5-second press to remove any moisture or wrinkles. This helps the transfer bond properly.

2. Place the Transfer

Cut your design from the gang sheet if needed. Then place the DTF transfer face down on the garment, so the inked side touches the fabric and the clear film is on top.

3. Press It

Set your press to the correct temperature and time (see the table above). Use medium to heavy pressure, close the press, and let the magic happen.

4. Peel the Film

This step depends on the type of transfer:

Cold Peel: Let it cool completely. Then peel the film off slowly and steadily.
Hot Peel: Wait 2–3 seconds after lifting the press, then peel while the transfer is still warm.

5. Finish with a Second Press

Want that design locked in and looking extra clean? Cover it with parchment paper or a Teflon sheet and press again for 10 seconds. This helps improve wash durability and gives the finish a polished feel.

DTF Aftercare Tips – Keep Your Prints Looking Fresh

Right care makes all the difference. Here’s how to help your transfers last:

Do not wash for 24 hours.
Wash inside out, in cold water only.
No bleach or harsh detergent.
Tumble dry low, or hang to dry.
Never iron directly over the design area.

Tips for Consistent, Pro-Quality Results

For consistent, professional quality results:

Use a quality heat press—not a household iron.
Pre-press. It’s quick and makes a big difference, don’t skip it.
Double check your temp, pressure, and peel time.

Transfers, store flat in a cool dry area and ensure there is no direct sunlight.

Need More Transfers? We’ve Got You Covered

Re-up your supplies or explore something new:

Questions? Let’s Talk.

Whatever it is regarding—pressing issues, order questions, or file setup—we're here to help.

Get in touch with us via email at info@dtftransfersnow.com. Alternatively, you can call us at (305) 542-5752 during business hours M-F 10-6:30 PM

DTF Pressing Instructions You Can Rely On

The starting point for any amazing print is a clean press. With these DTF pressing instructions, you will get the bold and vibrant results your designs need and value. Keep this guide next to your heat press, thank me later.

Let’s press something amazing together.
I’d be happy to create a mobile, printable version, or even add visuals for those that prefer seeing first before all else.

GENERAL DTF TRANSFERS PRESSING INSTRUCTIONS

Ensure your garment or surface is clean, dry, and free from any wrinkles or debris. Pre-press garments to release moisture.

Set the Heat Press: to 300 degrees Fahrenheit.
Press for 10 seconds with high pressure (60 PSI). Pressure is one of the most important factors in successfully adhering your transfers to your garment.
Let the garment completely cool down. Once cooled down, carefully peel off the transfer film starting at a corner.
Repress another 10 seconds to seal in your design with a Teflon sheet on top as protection.
The second press seals in your design.

At DTF Transfers Now, we know that you will be applying DTF Transfers on different materials, please refer to our blog posts for more information on how to press DTF Transfers.