DTF Transfers Ready to Press
Choose a design from our library or upload your own, set the exact size and quantity of each one, and we print the whole gang sheet and ship it ready to press within 24 hours, Mon-Fri.
Library designs are licensed artwork. You are buying printed transfers; design files are not included.
- You choose the size of every design, pocket to full front
- You choose how many of each, on one sheet
- You receive the printed sheet. No weeding, no cutting, no printing on your side
You Decide the Sheet. We Print It.
Three steps from picking a design to pressing it. No design software, no file prep.
1Pick your designs
Browse the library by theme or search for what you need, and add as many designs as you want to the same sheet. Your own artwork goes on the same sheet too.
2Set the size and the quantity
Type the exact width of each design, from a 2-inch sleeve print to a 12-inch front, and how many copies you need. The builder arranges everything and shows the sheet length you need.
3Receive it printed, ready to press
Your sheet prints within 24 hours, Monday to Friday, and ships with the adhesive already applied. Cut the designs apart, press, and peel.
How to Choose the Size of Each Design
In the builder you type the width of each design and the height follows. These are the sizes we recommend most often. The full guide covers every placement, from tote bags to hoodies.
| Placement | Size |
|---|---|
| Full front, adult t-shirt | 12 x 14 in |
| Front chest | 12 x 8 in |
| Left chest | 4 x 4 in |
| Short sleeve | 3.5 x 3.5 in |
Design width by shirt size
| Shirt size | Design width |
|---|---|
| Adult S | 9 to 9.5 in |
| Adult M | 9.5 to 10 in |
| Adult L and XL | 10 to 11 in |
| Adult 2XL to 4XL | 11 to 13 in |
| Youth XS to XL | 7.5 to 8.5 in |
One design, three sizes on the same sheet: order it at 12 in for adults, 8 in for youth, and 4 in for the left chest.
Browse DTF Transfer Designs by Theme
Seasonal holidays, Mother's and Father's Day, professions, and vacation. New designs are added every season.
What "Ready to Press" Means for Your Shop
Every DTF transfer we ship is ready to press: printed on film, powdered and cured, with the adhesive already on it. The only work left is yours, at the press.
- No weeding and no cutting machine
- No printer, ink, or powder to buy
- Press on cotton, polyester, and blends
- Hot peel, also called instant peel, or cold peel: you choose the film
Press settings for DTF transfers
- Our shop, cotton
- 300-310°F (149-154°C), 10 seconds
- Your press, cotton
- 300-320°F (149-160°C), 10 to 15 seconds
- Polyester
- 280-295°F (138-146°C), 8 to 10 seconds
- Pressure
- Medium-firm
- Finish
- Final press with parchment or Teflon
What to Look For in a Ready to Press Transfer
Not every transfer presses the same. These are the things that decide how the print looks and how it holds up, and how we handle each one.
Print and color
Every sheet prints at 300 DPI, from the library file or yours. Our printers are calibrated to G7 color standards by our in-house G7 Color Master certified technician, so colors stay consistent from one order to the next.
Inks and powder
OEKO-TEX certified inks and adhesive powder, tested for harmful substances and safe on skin. The transfer withstands many washes when it is pressed correctly: medium-firm pressure, final press, and 24 hours before the first wash.
Film and proof
Hot peel (instant peel) or cold peel, your choice. And the best proof is pressing one yourself: order the free sample pack, press it, wash it, and then decide.
Get the free sample pack →Build Your Own or Pick a Premade Gang Sheet
Both arrive printed and ready to press. The difference is how much you decide.
Build it from the design library
- You pick only the designs you will press
- Each design at the size you need, pocket to full front
- Any quantity of each design
- Add your own logo or artwork on the same sheet
Premade gang sheet, already arranged
- A themed sheet, designed and laid out by us
- Fixed designs and sizes, one of each
- Add it to your cart. No builder needed
Sheet Sizes and Prices
Every sheet is 22 inches wide. Choose the length that fits your designs. The designs from the library are included in the price.
| Sheet size | Length | Hot peel price |
|---|---|---|
| 22 x 12 in | 1 ft | $9.99 |
| 22 x 24 in | 2 ft | $12.00 |
| 22 x 36 in | 3 ft | $18.00 |
| 22 x 48 in | 4 ft | $24.00 |
| 22 x 60 in | 5 ft | $30.00 |
| 22 x 72 in | 6 ft | $36.00 |
Longer sheets and other film styles are available in the builder. Not sure what length you need? Try the Gang Sheet Calculator
Wholesale and bulk orders, ready to press
Print shops and resellers order the same way: pick the designs, set the sizes, and order as many sheets as you need. There are no minimums, and you can reorder the same sheet in any quantity.
Wholesale DTF transfers →About the design library
- The designs are licensed artwork from independent designers.
- Your order is for printed transfers. Design files are not included and cannot be downloaded or sent on request.
- Library designs are not exclusive, and may not be copied, reproduced, or registered as a trademark or logo.
- We may remove a design from the library at any time.
If you believe a design infringes your rights, contact us and we will review it.
Miami Pickup and Nationwide Shipping
We print in Kendall, Miami, and ship to every state from Florida. Pick up for free at our shop, or choose your delivery speed at checkout.
- Free pickup at 13276 SW 120th St, Miami, FL 33186
- Nationwide shipping, delivery speed selected at checkout
- Free ground shipping on orders over $75 with code GroundFree
- Free 2-day over $300 with 2ndDayFree, free next-day over $500 with NextDayFree. Codes cannot be combined with coupons.
Need it today?
Standard sheets print within 24 hours, Monday to Friday. If you need a sheet printed today, order the separate Same-Day DTF product: by 12 PM ET to ship today, or by 3 PM ET for free pickup in Kendall.
Same-Day DTF transfers →Ready to Press DTF Transfers: FAQ
What does "ready to press" mean?
A ready to press DTF transfer arrives printed on film with the adhesive already applied. You place it on the garment, press it with a heat press, and peel the film. There is no weeding, cutting, or printing on your side. Our sheets print within 24 hours, Monday to Friday.
Are the designs in the library free?
Yes. Every design in the library is included at no extra cost. You only pay for the gang sheet, and the price depends on its length, whether you fill it with library designs, your own artwork, or a mix of both.
Can I choose the size of each design?
Yes. Each design can be resized on the sheet, from a small pocket or sleeve print to a full front. You also set the quantity of each one, so a single sheet can hold several left-chest prints and a few full-size fronts of the same design.
Can I mix library designs with my own artwork?
Yes. Upload your own files in the same builder and place them next to the library designs. This works well for adding your shop logo, neck labels, or a customer name to a themed design, all on one sheet and one order.
Do you offer premade gang sheets too?
Yes. If you would rather skip the builder, our premade gang sheets come already designed and arranged by theme. You add the sheet to your cart and it prints the same way, within 24 hours, Monday to Friday.
Can I get the design files?
No. Your order is for printed DTF transfers. The design files are not included, and we cannot send them on request. If you need more prints, add the design to a new sheet in any quantity.
Are the library designs exclusive?
No. The designs in the library are licensed artwork from independent designers, so other shops may offer the same designs. They cannot be registered as a trademark or logo. If you need artwork that is only yours, upload your own design.
Do I need a heat press?
Yes. A heat press gives the even pressure and steady temperature DTF needs. A household iron cannot hold either across the whole design, so the transfer ends up peeling in the wash. Any flat heat press works, from a small clamshell to a production press.
How long does it take to press a transfer?
About 10 seconds. In our Miami shop we press cotton at 300-310°F for 10 seconds, then do a final press of 5 to 10 seconds with parchment or Teflon after peeling. With your own press, 10 to 15 seconds is the safe range for cotton.
Where do the library designs come from, and can I use my own?
The library designs are licensed artwork from independent designers. Your own artwork goes on the same sheet: upload a PNG with a transparent background at 300 DPI. Check it first with our free DPI Checker to catch low resolution or semi-transparent edges before you order.
What can I press these transfers on?
Cotton, polyester, and blends: t-shirts, hoodies, sweatshirts, tote bags, and more. For hats, use our DTF transfers for hats, which are sized for the crown. These transfers are for fabric; for mugs, tumblers, and other hard surfaces, UV DTF is a different product.
Build your sheet in minutes
Pick the designs, set the sizes and quantities, and we print it within 24 hours, Mon-Fri.