DTF Transfers Ready to Press

» Single designs · Design library

Ready to press DTF transfers with the designs already made. Pick a single design in the size you need, or build your own sheet from our design library of more than 2,800 designs. Everything prints on DTF film with the adhesive applied and ships within 24 hours, Monday to Friday.

✓ No weeding or cutting✓ No minimums✓ Peel hot or cold✓ Design files not included

Skip to product grid
0 products

No products found
Use fewer filters or remove all

Single Designs or the Design Library

Same film, same press settings, same 24-hour turnaround.

Single designs

One design at the size you pick, from a pocket print to an adult front, priced by size at $0.05 per square inch. Add the quantity you need.

Design library

More than 2,800 licensed designs in our gang sheet builder, included in the sheet price. Set any size and quantity and add your own logo. Browse designs in the builder →

How the Design Library Works

Three steps from picking a design to pressing it. No design software, no file prep.

STEP 1

Open the design library

In our gang sheet builder, browse more than 2,800 designs by theme and add the ones you need. Your own artwork goes on the same sheet.

STEP 2

Set the size and the quantity

Type the width of each design, from a 2-inch sleeve print to a 12-inch front, and how many copies you need. The builder lays them out and shows the sheet length.

STEP 3

Receive it printed

Your sheet ships within 24 hours, Monday to Friday, printed on film with the adhesive already applied. Cut the designs apart, press, and peel.

Sizes and Prices

Exact sizes and prices are on each product.

Single designUp toPrice
Adult front11 in wide≈ $6.05
Youth8 in wide≈ $3.20
Toddler / small6 in wide≈ $1.80
Pocket / left chest3.5 in wide≈ $0.61

Single design prices are for a square design; taller or wider designs cost a little less. Sheets you build in the design library are priced by their length, like any custom gang sheet.

About the Design Library

  • The designs are licensed artwork from independent designers.
  • Your order is for printed transfers. Design files are not included and cannot be downloaded or sent on request.
  • The designs are not exclusive, and may not be copied, reproduced, or registered as a trademark or logo.

If you believe a design infringes your rights, contact us and we will review it.

Ready to Press DTF Transfers: FAQ

Sizes, files and pressing.

What does "ready to press" mean?
A ready to press DTF transfer arrives printed on film with the adhesive already applied. You place it on the garment, press it with a heat press, and peel the film. There is no weeding, cutting, or printing on your side.
What are my options?
Single designs come in four sizes, priced by size. In the design library you pick any designs, at any size and quantity, and add your own artwork on the same gang sheet.
Are the designs in the library free?
Yes. Every design in the library is included at no extra cost. You only pay for the gang sheet, and its price depends on its length, whether you fill it with library designs, your own artwork, or a mix of both.
Can I mix library designs with my own artwork?
Yes. Upload your own files in the same builder and place them next to the library designs. This works well for adding your shop logo, neck labels, or a customer name to a themed design, all on one sheet and one order.
How fast do they ship?
Ready to press transfers ship within 24 hours, Monday to Friday. Delivery time depends on the shipping method selected at checkout, and local pickup in Kendall, Miami, is free.
Do I get the design files?
No. You are buying printed DTF transfers. The designs are licensed artwork, and the files are not included or sent on request.
Are these designs exclusive?
No. They are licensed artwork from independent designers, so other shops may offer the same designs, and they cannot be registered as a trademark or logo. If you need artwork that is only yours, upload your own design.
How do I press them?
In our Miami shop we press cotton at 300-310°F for 10 seconds with medium-firm pressure, peel, and do a final press of 5 to 10 seconds with parchment or Teflon. With your own press, 10 to 15 seconds is the safe range for cotton. Polyester takes 280-295°F for 8 to 10 seconds.
What can I press these transfers on?
Cotton, polyester, and blends: t-shirts, hoodies, sweatshirts, tote bags, and more. They are made for fabric; for mugs, tumblers, and other hard surfaces, UV DTF is a different product.