Understanding DTF Transfers

What Are DTF Transfers

When you send your gang sheet to print, a DTF printer prints it on transparent, special DTF film. Next, we apply an adhesive powder to the back of the print to ensure its transferability to the desired garment. Finally, we cure the powder to establish a bond between the film and ink. At this point, it is ready for pressing.

How Long Do DTF Transfers Last?

DTF Transfers can withstand multiple washes without fading or cracking. However, it is important that during the process of pressing your design into the garment desired you must ensure pressure is at 60 psi. Checking the temperature is crucial as well, ensuring the temperature is correct will create the appropriate bond making your transfer last even more!

To make your DTF transfers last longer, follow these simple care instructions:

- Wash garments with the transfers inside out in cold water using mild detergents.

- Avoid using harsh chemicals, bleach, or rough washing methods.

- Tumble dry on low heat or air dry to reduce heat exposure.

Following these steps will help keep your DTF transfers looking vibrant and in good condition for a long time.

What heat press is best for DTF Transfers?

Our transfers are compatible with most heat presses and will yield satisfactory results. We recommend setting your heat press to 300 degrees Fahrenheit, applying high pressure for 10 seconds, and maintaining a PSI of 60. This combination of time and temperature ensures proper transfer adherence. Alternatively, a Cricut machine can apply the transfers. Note: Pressing your DTF Transfers with anything other than a heat press may yield different results than the heat press and could result in a defective transfer.

Are DTF Transfers Eco-friendly?

DTF transfers are generally more eco-friendly than some other printing methods, and here's why:

- Water-based Inks: They often use water-based inks that emit fewer volatile organic compounds (VOCs), making them a cleaner choice for the environment.

- Reduced Waste: These transfers allow for on-demand printing, which means you only produce what you need, reducing overproduction and waste.

- Energy Efficiency: The DTF process is more direct and uses less energy because it skips steps like screen preparation or curing.

- Recyclable Substrates: DTF transfers work on many substrates, including recyclable fabrics, helping to cut down on the demand for new materials.

- Less Water Consumption: Unlike traditional methods, DTF transfers use minimal water, which helps conserve water resources.

However, the environmental impact of DTF transfers can vary depending on the inks, films, and practices of different manufacturers. Always check with your supplier to ensure they adhere to eco-friendly practices.

How Do DTF Transfers Differ from Other Printing Methods?

DTF transfers distinguish themselves from other printing methods like screen printing and heat transfer vinyl in several key ways:

- Printing Process: DTF transfers use inkjet printers with specialized inks to print designs onto transfer films. These designs are applied to various substrates using heat and pressure.

- Color Quality: Known for their vivid colors and sharp details, DTF transfers leverage inkjet technology for high-resolution prints that truly pop.

- Versatility: DTF transfers are not limited to specific materials. They can be applied to a diverse range, including cotton, polyester, leather, denim, and nylon. This adaptability makes them a reliable choice for a wide variety of customization projects, instilling confidence in their versatility.

- Durability: When applied and maintained correctly, DTF transfers exhibit remarkable resilience. They can withstand multiple wash cycles without significant fading or cracking, ensuring the longevity and vibrancy of your designs, and providing you with a sense of security about the quality of your prints.

- Complex Designs: DTF transfers excel at reproducing complex designs and gradients. They can handle intricate details and smooth color transitions that are challenging for other printing methods.

- Production Flexibility: Ideal for small to medium-sized batches, DTF transfers allow for multi-color designs to be printed simultaneously on a single sheet, which is more efficient than screen printing.

- Quick Setup and Turnaround: DTF transfers simplify production with the minimal setup required, eliminating the need for screen or stencil preparation. This translates to quicker turnaround times, making them an excellent choice for projects with time constraints, and providing you with a hassle-free printing experience.

While DTF projects offer unique benefits, selecting the proper printing method should be based on your project's specific requirements, including design complexity, substrate type, quantity, and desired visual effects. Each method has its strengths and is best suited to different needs.

Why choose dtf transfers now for my apparel customizing needs?

At DTF Transfers Now, we are proud to be an American business, crafting all our products here in the USA. For our local customers in Miami, we offer a convenient free pickup option at our Miami location. Support a growing American business—order today and enjoy the simplicity of local pickup, or opt for our reliable delivery service!

Exploring UV DTF Transfers

What Are UV DTF Stickers?

Ever wondered what is a UV DTF Transfer? UV DTF stickers are UV-cured transfers that were made for those hard surfaces a normal transfer cannot be applied to. A UV DTF Sticker is perfect for customizing mugs, thermos, glasses, etc. making it a great gift option.

What Are the Advantages of UV DTF Transfers?

UV DTF transfers have many advantages, some of them are that they do not require any heat to be transferred, making them easy to apply. Also, they support almost every design and are resistant as well as durable.

What surfaces can UV DTF be applied to?

UV DTF transfers are versatile and can adhere to various surfaces, enhancing customization options. Here's a quick rundown of typical applications:

- Plastics: Use them on PVC, acrylic, polycarbonate, and similar materials for branding plastic products like water bottles and phone cases.

- Metals: They work on stainless steel, aluminum, and brass to customize items such as trophies and keychains.

- Glass: Ideal for glassware, mirrors, and windows, these transfers handle everyday use and cleaning well.

- Paper/Cardboard: Great for vibrant, durable prints on paper-based products like packaging and stationery.

- Wood: Suitable for wooden signs, plaques, furniture, and other wooden items.

For a hassle-free experience, ensure the surface is clean, test a small area before full application, and follow the manufacturer's instructions for pressure and application techniques. This will guarantee optimal adhesion and durability.

What Are the Advantages of UV DTF Transfers?

UV DTF transfers have many advantages, some of them are that they do not require any heat to be transferred, making them easy to apply. Also, they support almost every design and are resistant as well as durable.

Are DTF transfers and UV DTF transfers washable?

Yes, both DTF transfers and UV DTF transfers are typically washable when applied correctly and cared for properly. However, the specific durability and washability may vary depending on the quality of the transfer film, ink, and the substrate to which the transfers are applied.

To ensure the longevity and washability of DTF transfers and UV DTF transfers, it is essential to follow these guidelines:

Wait before washing: Allow the transferred design to fully cure and set before washing. This typically involves waiting at least 24 hours after the application.

Follow recommended washing instructions: Always follow the manufacturer's instructions for washing the garment or item with the transferred design. Typically, it is recommended to wash the item inside out in cold water using mild detergents.

Avoid harsh chemicals and bleach: Harsh chemicals and bleach can degrade the transferred design over time. It is advisable to avoid using these substances when washing the item.

Gentle washing cycle: Choose a gentle or delicate washing cycle to minimize the stress on the transferred design.

Air drying or low-heat tumble drying: To prevent excessive heat exposure, it is recommended to air dry the item or use a low-heat setting when tumble drying. High heat can potentially damage the transferred design.

Avoid ironing directly on the design: If ironing is necessary, it is best to iron the garment inside out or place a cloth between the iron and the transferred design to protect it from direct heat.

By following these care instructions, you can help ensure that your DTF transfers and UV DTF transfers maintain their vibrancy and durability even after multiple washes. It's important to note that proper care practices may vary slightly depending on the specific transfer film and ink used, so always refer to the manufacturer's instructions for the best results.

Can UV DTF transfers be used for outdoor applications?

UV DTF transfers can be used for outdoor applications, but their durability and longevity in outdoor environments may vary depending on several factors. Here are some considerations regarding the outdoor use of UV DTF transfers:

UV Resistance: UV DTF transfers are typically formulated with UV-cured inks that offer good resistance to UV radiation. This helps to mitigate the effects of sunlight exposure and prevent premature fading or degradation of the transferred design. However, the level of UV resistance can vary among different UV DTF transfer films and inks. It's important to consult the manufacturer's specifications and recommendations for outdoor use.

Substrate Compatibility: The substrate to which the UV DTF transfers are applied also plays a crucial role in their outdoor durability. Some substrates, such as certain types of fabrics or plastics, may be more susceptible to UV damage or weathering. Ensure that the substrate is suitable for outdoor applications and has good resistance to UV radiation and environmental conditions.

Lamination for Added Protection: To enhance the durability of UV DTF transfers for outdoor use, consider applying a clear protective laminate over the transferred design. This additional layer can provide extra UV protection, weather resistance, and abrasion resistance, helping to prolong the life of the transferred design in outdoor settings.

Proper Maintenance: Regular maintenance and care can contribute to the longevity of UV DTF transfers used outdoors. Follow the manufacturer's recommendations for cleaning and maintenance to ensure optimal performance. Avoid using harsh chemicals or abrasive cleaning methods that may damage the transferred design.

While UV DTF transfers can be used for outdoor applications, it's important to note that extended exposure to harsh outdoor conditions, such as intense sunlight, extreme temperatures, and moisture, may eventually impact the durability and vibrancy of the transferred design. For long-lasting outdoor applications, consider consulting with a printing professional or exploring alternative printing methods specifically designed for outdoor use, such as UV-resistant screen printing or specialty outdoor signage materials.

Gang Sheet and Customization

What Is a Gang Sheet?

A gang sheet in DTF printing is a significant transfer film sheet with multiple designs printed at once. This method boosts efficiency by simultaneously printing several designs, reducing material waste and production time. It's commonly used in DTF printing to transfer designs onto garments or other substrates with a heat press, helping businesses save on costs and increase productivity.

Why Are Gang Sheets Beneficial?

DTF (Direct-to-Film) transfers offer vibrant, detailed prints with high color saturation, suitable for various products like fabrics and accessories. They are durable, resisting fading, cracking, and peeling even after repeated washes. DTF prints are also soft and flexible, integrating seamlessly with materials for a comfortable feel, making them perfect for customizing apparel like t-shirts and hoodies.

Can I Create Custom-sized Gang Sheets?

Yes! Your gang sheet should be 22 inches wide, but you can choose any length you prefer! Just send us your gang sheet, and we'll cover everything else!

How Do I Create a Gang Sheet?

You can create a gang sheet with any design program like Photoshop, Illustrator, or Canva.com. Here's how to do it:

1. Set your document to be 22 inches wide. The length will vary based on how many designs or logos you want to include

2. Set the resolution to 300 dpi, and the color mode is RGB.

3. Upload your images to your chosen design program. For the best print quality, use vector images.

4. Adjust each logo or image to the needed size and replicate as required.

5. Save your gang sheet as a PNG file with a transparent background.

If you're using Canva:

- Start a new design with the correct width and any length as needed

- Upload and arrange your images.

- Save the gang sheet as a PNG or PDF, in size 3 with a transparent background.

Can Gang Sheets Be Reused?

No, gang sheets are not reusable. Once you transfer the designs from a gang sheet to the desired surfaces, the transfer film and ink permanently adhere to those surfaces. Gang sheets help optimize printing by arranging multiple designs on one sheet to maximize material use and reduce waste. For additional transfers of the same design, you must create a new gang sheet with fresh materials to maintain quality and efficiency.

How does Gang Printing benefit businesses?

No, gang sheets are not reusable. Once you transfer the designs from a gang sheet to the desired surfaces, the transfer film and ink permanently adhere to those surfaces. Gang sheets help optimize printing by arranging multiple designs on one sheet to maximize material use and reduce waste. For additional transfers of the same design, you must create a new gang sheet with fresh materials to maintain quality and efficiency.

How can Gang sheet transfers streamline my production process?

By using Gang Sheet Transfers, you can significantly streamline your printing process. This method handles multiple designs at once, reducing setup time and boosting overall efficiency. Ganging your artwork increases productivity by enabling the simultaneous printing of various designs in a single batch, effectively meeting diverse client needs. This efficiency allows you to submit artwork for multiple projects simultaneously.

Application and Usage

How Do I Apply DTF Transfers or UV DTF Transfers?

To apply your design with DTF transfers, follow these instructions:

- Ensure your garment or surface is clean, dry, and wrinkles or debris-free. Pre-press garments to remove moisture.

- Heat your press to 300 degrees Fahrenheit.

- Press for 10 seconds at high pressure (60 PSI)—pressure is crucial for a successful transfer.

- Allow the garment to cool completely, then carefully peel off the transfer film starting from a corner.

- Repress for another 10 seconds with a Teflon sheet on top for protection.

This second press helps to seal your design permanently

To apply your UV DTF design, follow these steps:

- Clean the surface to remove any dust or debris.

- Place the UV DTF face down.

- Remove the carrier paper.

- Position the UV DTF on the desired surface.

- Use a squeegee to secure it in place and remove any air bubbles.

- Peel off the adhesive film.

Can DTF Transfers Be Used for Dark-colored Fabrics?

Yes, our DTF transfers work incredibly well on light and dark fabrics, offering unbeatable vibrancy and durability.

What types of fabrics can DTF transfers be pressed onto?

You can press DTF transfers on various materials, including cotton, blend, spandex, denim, nylon, silk, leather, polyester, linen, and canvas.

Artwork & Customization

Are there art or setup fees for DTF transfer orders?

We don't charge art or setup fees for our DTF Transfers! Just send us your artwork, and we'll cover everything else!

Can I include multiple designs and sizes on one DTF transfer gang sheet?

Feel free to include as many designs as you like in various sizes to meet your design needs. We'll print your designs exactly as you provide them, in the precise size and colors you specify. So go ahead and fill up that gang sheet—we'll handle the rest. Best of all, we charge by the gang sheet, not by the number or size of the designs, making this a cost-effective option for creating customized apparel.

Can specific hex color codes be matched for DTF transfers?

We don't offer color matching, but if you're looking for a specific tone, please contact us via email at info@dtftransfersnow.com.

Can you clean my DTF transfer artwork or remove the background?

We offer graphic design assistance for an additional cost, including cleaning your artwork, vectorizing it in high quality, removing backgrounds, and more. Please email your artwork and request a quote from info@dtftransfersnow.com. We'll respond with the cost, and you can proceed with your order.

Do I have to mirror my art when uploading?

DTF Transfers don't require mirroring, making them even more convenient and one of the best printing techniques available!

What file types should I use when uploading my artwork?

Please save your artwork or gang sheet in PDF or PNG format to simplify the DTF Transfer printing process.

What is the appropriate size for a left side chest logo?

Ideal sizes for a left chest logo are 3x3, 4x2, and 4x4 inches. However, depending on your specific needs and the dimensions of your artwork, a custom size may be necessary.

Can I create custom designs with DTF transfers?

The true beauty of DTF transfers is the ability to print any custom design! Ensure that your artwork is vectorized at least 300 dpi or higher and has a transparent background.

Ordering & Shipping

Are there minimum quantity requirements when placing orders?

There are no minimum quantity requirements when placing an order! However, our smallest gang sheet size is 12 inches at $9.99.

Can I cancel my order?

If your order has not been processed, you can cancel it and receive a full refund. Please remember that all our orders print and ship within 1-3 business days after placement. Once your order is processed, a refund will not be possible.

We understand that unforeseen circumstances can arise. Rest assured, we are committed to accommodating our customers to the best of our abilities. To ensure a full refund, please get in touch with us as soon as possible.

For help canceling your order, please get in touch with us at (305) 542-5752.

How can I check the status of my order?

Once you place your order, you will receive regular email updates about the status of your order. If you are not receiving these emails, you can also check the order status by logging into your account.

What if there is an issue with my order?

If you encounter any issues with your order, please get in touch with our customer service or visit our website to fill out an "Order Issue Form." We will promptly get back to you to resolve the issue.

What should I do if my order is late?

Once the order leaves our distribution center, it's out of our control, but we are here to help you locate it. Please be patient; some orders might be marked as delivered and arrive a day later. We apologize for any inconvenience and appreciate your understanding.

If your project is time-sensitive, please check our map for estimated delivery dates or choose our same-day print and ship option to receive your order as quickly as possible.

Can I pick up my order?

At DTF Transfers Now, we proudly craft all our products in the USA, embodying the spirit of American enterprise. We're thrilled to offer our valued customers in Miami a convenient free pickup option at our local facility. Support a thriving American business—place your order today to enjoy the ease of local pickup, or opt for our dependable delivery service!

Do you offer international shipping and ships to Canada?

No, We currently only offer shipping within the US.

How quickly can I receive my order?

We offer a same-day print option that prioritizes your order to be printed on the same day it is placed. Additionally, we provide a same-day shipping option, which delivers your package within 24-48 hours, depending on your location. You can add both options to receive your order as quickly as possible.

What are your shipping options?

We offer five shipping options to suit your project needs: free pickup, UPS Ground for $11.99, UPS 3-Day for $25, UPS 2-Day for $35, and UPS 1-Day for $65. Please select the option that best fits your requirements.

Pricing & Products

DTF transfers by size & DTF gang sheet pricing

The pricing for DTF Transfers By Size depends on two factors:The size of the design and the quantity of the order.

Please refer to our DTF Transfers By Size price chart below for detailed pricing based on size and quantity combinations. Order your DTF Transfers By Size here.

The pricing for DTF Gang Sheets is based entirely on the size of the gang sheet you select. We do not charge extra for the designs on your gang sheet. You can include as many designs as you want as long as they fit within the size of your chosen gang sheet.

For a comprehensive understanding of our DTF Gang Sheet pricing, please refer to the price chart below. It's designed to give you a clear idea of the costs associated with different gang sheet sizes.

Order your DTF Gang Sheet here.

Do you charge per color on my designs?

We do not charge per color so that you can send simple, detailed, or colorful designs, and the price will remain the same. You will only be charged for the designs, with no extra fees based on color or detail.

Wholesale & bulk discount pricing

Take advantage of even more affordable prices with our exclusive offer! Use the code SAVE16 at checkout to secure a 16% discount on regular DTF gang sheet orders over $1200. Please note that this discount applies to regular processing times and excludes same-day printing orders, shipping, and supplies. Also, enjoy free shipping on orders exceeding $200 by using the code XGRYHTHV at checkout. For those in the Miami, FL, area, you can opt for free pickup to receive your order faster and save on costs.

Don’t forget about our Loyalty program! It rewards our valued customers by allowing you to accumulate points with every purchase, earning you 2% off all future orders. Check out our Loyalty page for more details!

Do you offer clothing tags?

Yes! We offer ready-to-print shirt labels that work great on light and dark fabrics. Click here to add a label to your cart!

Do you offer puff print DTF transfers?

No, we do not offer puff prints.

Tools, Tips & Tutorials

4 easy steps to press DTF transfers

1. Prep the Fabric:

Place the fabric on the heat press and pre-press to remove any wrinkles and moisture.

2. Press the First Time:

Position the DTF transfer on the fabric.

Press for 10 seconds, using a heat pillow for added pressure.

Set heat press to 300°F (150°C), set pressure to 60 PSI or on high.

3. Peel:

Cold Peel: Allow the transfer to cool to the touch before peeling.

Hot Peel: Peel immediately after the first press.

4. Press a Second Time:

Place a guard sheet over the transfer and press for 10 seconds.

Are DTF transfers lightweight and breathable?

DTF Transfers are lightweight, breathable, and have a soft, flexible feel, but achieving this quality requires a second press. If you skip the second press, the design won't properly seal to the fabric, compromising its durability and texture.

DTF transfers: Hot vs. Cool peel

There are three key differences between hot and cold peel DTF transfers. Firstly, hot peel transfers can be peeled immediately after pressing, while cold peel transfers require cooling down before peeling. This makes hot peels an excellent option for increasing productivity. However, there are notable differences in the final results: hot peels are less vibrant and slightly more reflective than cold peels. Despite these differences, both types maintain incredible durability and a soft, flexible feel.

How are DTF transfers made?

DTF Transfers are created by printing designs directly onto DTF film using DTF ink. After printing, the designs are coated with DTF powder and cured in an oven. Once cured, the individual designs can be cut out and pressed onto any fabric.

Washing instructions after pressing your DTF transfers

To maintain the quality of your DTF transfers after pressing, ensure you press a second time to seal the design onto the fabric properly. Turn the garment inside out for washing and avoid harsh chemicals like bleach. Use mild detergent and wash on a gentle cycle with cold water.

For drying, opt for low tumble dry or air dry. This will help keep your design looking great for longer.

WATCH: How to build a DTF Transfer Gang Sheet

WATCH: How to upload a DTF Transfer Gang Sheet

WATCH: How to convert loyalty points into vouchers

WATCH: How DTF Transfers are made

WATCH: How to make a gang sheet in Canva